HOW TO CLEAN DIRTY INTAKE VALVES WITH SEA FOAM SPRAY
Intake valves control the amount of fuel and air mixture that is allowed into the combustion chamber and exhaust valves are responsible for releasing spent gasses from the cylinders.
When operating properly, valves open and close at precise times and make thousands of strokes per minute. Over time, valves can develop problems that can range from minor to catastrophic. Several different engine operational failures, such as a broken timing belt or overheating, can lead to valve damage (bent or broken valves). But even under normal operating conditions, common problems can surface.
sea foam SPRAY
HELPS REMOVE HARMFUL DEPOSITS FROM CRITICAL ENGINE AREAS
Use Sea Foam Spray to clean intake valves and upper engine areas where fuel cleaners can’t reach.
COMMON PROBLEMS CAUSED BY DIRTY INTAKE VALVES
In a modern GDI (gasoline direct injection) engine, cleansing gasoline detergents do not reach behind the intake valves, allowing buildup of carbon deposits that can lead to valves that intermittently stick or don’t allow for proper airflow to the cylinders. That can create a loss of power, rough idle, hesitation, misfires, a drop in fuel economy and other problems.
It’s not unusual for issues related to carbon buildup to be misdiagnosed as faulty plugs, ignition coils or fuel injectors. Replacing those components, or reflashing the ECM, are common. But those efforts just waste the time and resources of a shop, and result in unhappy comeback customers because the actual problem is not addressed.
Valves can also stick for a number of reasons, such as deposits from oil or fuel, or weakened valve springs. A stuck valve will not only create performance problems—it could also cause a piston to make contact with the seat, causing major damage. Routine maintenance—regular oil changes and fresh fuel—can help prevent these valve problems.
CLEANING INTAKE VALVES WITH SEA FOAM SPRAY
Since gas does not wash over the intake valves in a GDI engine, fuel additives can’t reach behind the intake valves to clean deposits. Treating your engine with Sea Foam Spray through the intake is an easy way to clean deposits from intake valves in GDI engines.
How SEA FOAM SPRAY helps
CLEAN INTAKE VALVES
Apply Sea Foam Spray through fuel injection throttle bodies to clean harmful engine deposits from intake valves and combustion chamber areas. Use Sea Foam Spray to fog engines and coat spark plug cavities to protect your engine during storage.
Sea Foam Spray does not contain harsh detergent or abrasive chemicals that can harm your engine or fuel system components. Help your engine run cleaner and last longer!
#seafoamworks
related
products
For motors of all shapes and sizes.
HIGH mileage
Sea Foam HIGH MILEAGE works to keep higher mileage gas cars & trucks on the road longer.
power steering fluid
A premium synthetic formula for use in all types of domestic and foreign vehicles.
DEEP CREEP
A premium-grade lubricant oil and penetrant that creeps deeper and works harder.
>