HOW TO USE A HIGH CLEANING CONCENTRATION OF SEA FOAM IN FUEL
BENEFITS
quickly clean critical engine areas to overcome problems caused by harmful fuel residues and depositsA HIGHER CONCENTRATION (2+ oz per gallon) CLEANS BETTER AND FASTER THAN A LOW CONCENTRATIONSea Foam is made with 100% safe petroleum cleaning and lubricating ingredients and does not contain harsh chemicals that can harm engine parts or componentsapplicationS
For cleaning, add 2 or more ounces OF SEA FOAM per gallon TO A LOW AMOUNT OF FUEL – THE MORE YOU ADD TO FUEL, THE BETTER IT CLEANS! fOR CARS AND TRUCKS: ADD A FULL 16 OZ CAN OF SEA FOAM TO A LOW TANK (2-3 GALLONS). DRIVE UNTIL ALMOST EMPTY BEFORE REFUELING.for small engines, add up to a 1:2 ratio of sea foam to fuel to a low tank (as low as 8 oz for small engine equipement) and run until empty. Use 100% Sea Foam for diesel injector cleaning machines or when priming diesel fuel filters.treatment recommendations
For cars and trucks driven regularly: add to fuel every 3,000 miles. fOR MAXIMUM CLEANING, ADD A FULL 16 OZ CAN OF SEA FOAM TO A LOW TANK (2-3 GALLONS) AND DRIVE UNTIL ALMOST EMPTY BEFORE REFUELING. Small engines: to overcome engine problems, use a high cleaning concentration. to prevent engine problems, add 1 oz of sea foam per gallon to every tank of fuel.SUMMARY
Pour Sea Foam in your fuel tank to clean and lubricate your entire fuel system. It works through fuel injectors and carburetors to remove harmful residues and deposits from fuel passageways, intake valves, pistons, and chamber areas.
For cleaning a gasoline or diesel fuel system, it’s safe to add more Sea Foam to fuel. In fact, the more Sea Foam you add to fuel, the better it cleans!
Made from petroleum ingredients, Sea Foam is safe and effective when used in all types of gasoline or diesel fuels and fuel blends. Sea Foam does NOT contain harsh detergent or abrasive chemicals that can harm your engine or fuel system components.
HOW TO USE a high concentration of SEA FOAM
mOTOR TREATMENT IN FUEL
RELATED QUESTIONS
Can I soak valves in Sea Foam if they’re out of the engine?
Good question. Yes, soaking engine components or fuel system components (carb parts), transmission parts, and/or hydraulic system parts in a Sea Foam bath is a great way to clean parts.
Start with a slow cooker (crock pot). Either buy a new one for the kitchen (don’t use it for food again after using Sea Foam in it!), or purchase a cheap one dedicated to parts cleaning. Add enough Sea Foam Motor Treatment, High Mileage or Marine PRO to sufficiently cover the parts that need to be cleaned. Add the parts, put the cover on and turn the slow cooker on low or medium for 12-24 hours. After the “cooking time,” remove the parts and gently brush off the loosened contamination with a soft bristle brush or bottle brush to clean the remaining debris off the components. Pipe cleaners work great for small passageways. If there is still more contamination that needs to be cleaned, repeat the 12-24 hour “cooking time” and re-assess the parts. Hope that helps!
Should I use Sea Foam for SUVs and Trucks or Sea Foam high mileage? I have a 1986 Ford truck with 100,000+ miles, it has a 302 under the hood.
Thanks for the question!
I’d use High Mileage. It’s a strong cleaner formulated to clean stubborn residues and deposits in fuel and oil after years of buildup.
I’d add a full 16 oz can to a low tank of fuel (1/8 to 1/4 tank or so). Then, drive until almost empty before refueling (at least 20 miles if you can to give the High Mileage time to run through the fuel system). This creates a high cleaning concentration that works much faster and better than adding to a high amount of fuel.
I have an Onan generator that’s popping under load. Is it okay to put Sea Foam Motor Treatment directly into the carb?
Does Sea Foam work in ethanol-free gas?
Can I use Sea Foam Motor Treatment in my 2013 Honda Pilot?
HI Faith. Yes, you can use Sea Foam in your Honda Pilot’s fuel tank and oil crankcase. In fuel, will work to clean and lubricate fuel injectors and chamber areas. In oil, will liquefy heavy oil residues and deposits, improving oil flow. Hope this helps!
Jim D.TECH
0