Thanks for the question Gary. No treatment has the ability to remove water from fuel. If you have water contamination in your tank, it’s best to remove the fuel. If you think you have a small amount of water, try using isopropyl alcohol sold at auto parts locations. It works great to solubilize small amounts of water into the larger gasoline fuel phase, making it easier to burn the water through the engine. Hope this helps!
Florida_Cracker
2 years ago
Can Sea Foam gas treatment be used along with an alcohol additive (like HEET) in the same gas?
The answer is yes, you can mix. They actually make a great combination! HEET in the red bottle is isopropyl alcohol, which is great for cleaning, adding volatility, and handling moisture in fuel. Because Sea Foam is petroleum, it is miscible with isopropyl, meaning they will both mix evenly in fuel. [Isopropyl does NOT share the same characteristics as ethyl alcohol, which is used for ethanol.]
Paul
10 months ago
I have about 8 gallon of water in gas tank . Will this take care of that?
Yes – when added to your fuel tank, Sea Foam works great to clean and lubricate critical engine areas, which helps your engine run better and last longer. You can find lots more information (and how-to info) on the product page below: https://seafoamworks.com/product/sea-foam-motor-treatment-oil-fuel-additive/
George deleon
3 months ago
Does Sea Foam Motor Treatment remove water from diesel fuel?
Sea Foam will remove small amounts of moisture from fuel. However, you’d be better off draining and using fresh fuel or a different method dedicated to removing water.
Thanks for the question Gary. No treatment has the ability to remove water from fuel. If you have water contamination in your tank, it’s best to remove the fuel. If you think you have a small amount of water, try using isopropyl alcohol sold at auto parts locations. It works great to solubilize small amounts of water into the larger gasoline fuel phase, making it easier to burn the water through the engine. Hope this helps!
Can Sea Foam gas treatment be used along with an alcohol additive (like HEET) in the same gas?
The answer is yes, you can mix. They actually make a great combination! HEET in the red bottle is isopropyl alcohol, which is great for cleaning, adding volatility, and handling moisture in fuel. Because Sea Foam is petroleum, it is miscible with isopropyl, meaning they will both mix evenly in fuel. [Isopropyl does NOT share the same characteristics as ethyl alcohol, which is used for ethanol.]
I have about 8 gallon of water in gas tank . Will this take care of that?
Sea Foam will not help water in the tank like that. Your best bet is to drain the fuel tank and start over with fresh fuel.
Thanks. That what I’m going to do.
Is Sea Foam good to put in your fuel tank?
Yes – when added to your fuel tank, Sea Foam works great to clean and lubricate critical engine areas, which helps your engine run better and last longer. You can find lots more information (and how-to info) on the product page below:
https://seafoamworks.com/product/sea-foam-motor-treatment-oil-fuel-additive/
Does Sea Foam Motor Treatment remove water from diesel fuel?
Sea Foam will remove small amounts of moisture from fuel. However, you’d be better off draining and using fresh fuel or a different method dedicated to removing water.